sierrapeac
MIS
Does anyone use an HP 1000 Printer in Citrix? thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
HP 1100 Printer 2
- Thread starter sierrapeac
- Start date
- Status
- Thread starter
- #2
I spent a few hours at a customers site trying to get that to work. My final fix was ...
modifieing the WTSUPR.INF file to use the "HP LaserJet 5L" in place of the "HP LaserJet 1100"
Works fine now!!! Dave Namou, MCSE CCEA
modifieing the WTSUPR.INF file to use the "HP LaserJet 5L" in place of the "HP LaserJet 1100"
Works fine now!!! Dave Namou, MCSE CCEA
- Thread starter
- #4
sierrapeac
MIS
thank you so much. Where do I find that file and what do I have to do to it?
CitrixEngineer
Technical User
The wtsuprn.inf file starts life as wtsuprn.txt - you will need to rename it. It is located in %systemroot%\system32.
I hope this helps
I hope this helps
-
2
- #7
If you are running Citrix XP, you shouldn't modify the wtsuprn.inf file directly at a file level... You can, and it will work, but the change you make to the file will never be reflected in the management console.
For XP, it's better to map the printer driver in the Management Console.
For Metaframe 1.8 and older, modifying the wtsuprn.inf file directly is the right way to go.
Didn't know if this concerned Siearrapeac or not... didn't specify what version of Citrix he was running...
For XP, it's better to map the printer driver in the Management Console.
For Metaframe 1.8 and older, modifying the wtsuprn.inf file directly is the right way to go.
Didn't know if this concerned Siearrapeac or not... didn't specify what version of Citrix he was running...
CitrixEngineer
Technical User
Good point, MISAdmin - I'm guilty of assuming MF1.8 unless otherwise specified.
CE
CE
- Status