Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
howto setup disa on BCM450
- Thread starter urmysin
- Start date
DISA (Direct Inward System Access) on the BCM is used to allow a remote person to access trunks and paging via a DID number.
The DISA DN cannot conflict with a destination code or received digits on a target line. Then using Remote Access Packages for the trunks (PRI, VoIP, Analog DID) you allow the user hearing stuttered dialtone, they enter a COS Password that gives them the correct permissions.
It's spelled out pretty well in the manual and fairly easy to configure.
--DB
The DISA DN cannot conflict with a destination code or received digits on a target line. Then using Remote Access Packages for the trunks (PRI, VoIP, Analog DID) you allow the user hearing stuttered dialtone, they enter a COS Password that gives them the correct permissions.
It's spelled out pretty well in the manual and fairly easy to configure.
--DB
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question