Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HowTo Linking 2 sites -> IP-in-IP tunnel?

Status
Not open for further replies.
SpookyVBA

SpookyVBA

Programmer
May 29, 2002
9
CA
I have two similar networks at two different sites. One in CityA and one in CityB. They both are connected to the Internet with a DSL modem. That modem is connected to a router. Both networks are ran with a Win2K Server server. CityA is the PDC and CityB is its child. Now I want to have both machines from CityA and CityB show up in the same workgroup when I browse the Network Places of a computer. I have tried an IP-in-IP tunnel but I must be doing something wrong because nothing happens Regards,

J.F.D.
Freelance I.T. Consultant
 
Sort by date Sort by votes
I'd say if both sites are connected via a DSL modem, then you probably have dynamic IPs. I would upgrade to static first, then try a couple of the VPN endpoint routers. That is what we use in our office here in Texas to connect us to Corporate in Maryland.... Thanks,

Matt Wray
 
Upvote 0 Downvote
Both sites are using DSL with STATIC IP addresses. Now am I right in thinking IP-in-IP tunnel is the way to go?


SITE A SITE B
------ ------

[DSL]---------------{internet}---------------[DSL]
| |
[ROUTER] [ROUTER]
| |
[SWITCH]-[WIN2KSrv] [SWITCH]-[WIN2KSrv] Regards,

J.F.D.
Freelance I.T. Consultant
 
Upvote 0 Downvote
If you can get access to your router setting, you could set up pont to point tunnelling protocol (providing your router has that function). Be cautious, your tunnel is not going to be secure. Invest in some kind of firewalls that has VPN capable.
 
Upvote 0 Downvote
Call the guys at Sonicwalldepot.com
703-264-7776
They set me up with the same system, 2 sonicwall SOHO3's with VPN option. 1 at each end. Easy to setup and WORKS GREAT. Also lets you us a group VPN for telecommuting.
Tell them Ed Card
said HI
 
Upvote 0 Downvote
Since you have 2 sites only check with your ISP. If you have the same ISP on both sides you can get your ISP to do it for you with a minimal cost. When at first you don't succeed, try try again
 
Upvote 0 Downvote
I am using a Nexland Pro100 model router at both end.

From what everyone is saying this tunnel is something I need to setup in my hardware and not on my servers?

Is there other hardware you can think of that can be added to my setup to make this work? (Like the Sonicwall SOHO3's with VPN option that Card mentionned)

Please can you provide more information about: L2TP (Layer 2 Tunneling Protocol) with IPSec over PPTP for VPN Tunnel Regards,

J.F.D.
Freelance I.T. Consultant
 
Upvote 0 Downvote
Sorry, you are misunderstanding a little. L2TP with IPSec is instead of PPTP. It is more secure. From what I read on the Nexland Router, it should be fine for you. You will set up an IPSec tunnel between the 2 routers, and that's it. As long as you can see both sides you should be OK, as there is a built-in Firewall... Thanks,

Matt Wray
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

dpellegrini
  • Locked
  • Question
Website will load using hostname but not IP address
Replies
3
Views
449
mangentle
mangentle
ravalos
  • Locked
  • Question
Problem with PDFs in IIS
Replies
1
Views
475
gbaughma
gbaughma
Aquiles Vidal
  • Locked
  • Question
Web Browsers in Windows Server or Terminal Server
Replies
0
Views
267
Aquiles Vidal
Aquiles Vidal
antonio_dsanchez
  • Locked
  • Question
post-installation WSUS windows server 2016
Replies
0
Views
225
antonio_dsanchez
antonio_dsanchez
nukeinfer
  • Locked
  • Question
Internet restrictions for isolated PCs in the Network
Replies
1
Views
210
mangentle
mangentle

Part and Inventory Search

Sponsor

Back
Top