jupiter3000
Technical User
the 2620 is working cool, but now we upgrade our broadband, and got new IP address from our local ISP, so must reconfigure the router, need a little help to do so,...
thanks
thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
howto configure new IP address on cisco router 2620
- Thread starter jupiter3000
- Start date
- Status
ciscoexpert
IS-IT--Management
I assume, you know how to set up a pc/laptop to connect to the router and console into it.
Router>enable
Router#config t
Router(config)#interface ethernet0
Router(config-if)#no ip address
Router(config-if)#ip address <new ip> <new mask>
Router(config-if)#exit
Router#write memory
[OK]
Router#exit
Sankar Nair
General Datatech l.p.
Router>enable
Router#config t
Router(config)#interface ethernet0
Router(config-if)#no ip address
Router(config-if)#ip address <new ip> <new mask>
Router(config-if)#exit
Router#write memory
[OK]
Router#exit
Sankar Nair
General Datatech l.p.
ciscoexpert
IS-IT--Management
Jimmyzz, thanks for catching that..
Sankar Nair
General Datatech l.p.
Sankar Nair
General Datatech l.p.
- Thread starter
- #5
jupiter3000
Technical User
I got to admited you guys have been so helpful, every time that I've been at the edge of the cliff someone in this forum give me a hand... 
Thanks you all!
Thanks you all!
- Status