Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

howto config Midnight routines in cs-1000e rel 5.0 HA , Qestion?

Status
Not open for further replies.

jmpprd

Technical User
Nov 16, 2007
39
DO
hello , people

i have a cs-1000e with 2 cpu (HA) with release 5.0 in a Contact Center, the CC work 24 hours.

what is the best practice to config the midnight routines??

i can config the midnight routines for cpu switch???





 
NORTEL recommends that you NOT switch CPUs on midnight routines.
 
only in contact center or on all HA configuration ?????
 
What does this mean "only in contact center or on all HA configuration ?????"



What do you have programmed in the DROL now???





This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
You should not program CPU change during midnight routine at all. You will loose the elan link to your application when it happends.
CPU:s are checked anyway so no need to switch during midnight routine.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top