Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to use frame on a flash website...

Status
Not open for further replies.

Guest_imported

New member
Jan 1, 1970
0
I have a problem on how can i incorporate frame to a web site i am developing right now! i used 2 frame i want to display my flash buttons on the left side of the monitor and the corresponding link on the right side?
 
if all you want is to to have you flash buttons to control the right frames, just select the target in the get url part of actions. the target must have the same name as your right frame so that all actions are directed to that frame. also if you are using a flash movie fr all buttons use 100% width and 100% height for size.

tekagami
info@unlimitedstudios.com
 
hi Spec and Tek

I wouldn't necessarily advise someone to go 100% with the buttons. There's no need for it if you don't want them to fill the frame to the wrong proportions, just make them the size you require or designed them for and set the width of the frame in the frameset to suit your design.

dave
dave@pinkzeppelin.com

^^^^^^^^^^^^^^^^^^^^^​
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top