sanniadnan
Technical User
Hi all, this is my first post in this forum and I'm also new in IP Office Platform. I'm trying to configure an IP Office Server Edition Select system with primary server, secondary server and IP500v2 control unit with 4 analog trunk 16 expansion modules (client has 60 PSTN numbers).
The problem is, I can't configure to use analog trunks from primary server for outbound calls any how. Inbound is working fine. If I create user on ip500v2 (not in primary server) and set related shortcode then I can outbound calls through analog trunks without any issue but can't from primary server's users/extensions. I've tried to use an ARS with "line group id" as outbound id for trunk to ip500v2 from primary server and etc. but no luck.
Most probably I'm missing something. I can't find any example or documentation about how to use analog trunks in expansion system from primary server for outbound calls. I've configured SIP trunks for IPTSP on primary server and that is working fine for both inbound and outbound calls.
Can you help me on this or share some tips about any related documentation?
Thanks in advance.
The problem is, I can't configure to use analog trunks from primary server for outbound calls any how. Inbound is working fine. If I create user on ip500v2 (not in primary server) and set related shortcode then I can outbound calls through analog trunks without any issue but can't from primary server's users/extensions. I've tried to use an ARS with "line group id" as outbound id for trunk to ip500v2 from primary server and etc. but no luck.
Most probably I'm missing something. I can't find any example or documentation about how to use analog trunks in expansion system from primary server for outbound calls. I've configured SIP trunks for IPTSP on primary server and that is working fine for both inbound and outbound calls.
Can you help me on this or share some tips about any related documentation?
Thanks in advance.
