How to use a new HDU6 board? 2

[StZhibuwu]

Hi,

My pstn's Version BC8.0; I just got a new HDU6 board.

I want to dump the current system data into the hard disk of this HDU6 board, but I do know how to format the disk.

Could anybody tell me all the steps of dumping and how to format the disk? the detail of instruction would be very much appreciated!!

Thanks a lot in advance...

StZhibuwu

 

[rfpui]

Can you send to as printout of command:
IODDP;
And
FISCP:IODEV=SYSDISK1;
If after command above, answer from system is:
NOT ACCEPTED
DEVICE NOT EXIST
IODEV value you can find in printout of command IODDP.
IODEV value (name) is in column IODEV/SUBFS in this same row where in column I/O-BUS is SCSI/x . Probably x=3


----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[StZhibuwu]

Dear rfpui, The printout is:

IODDP;
I/O DEVICE DATA
NODE IODEV/SUBFS EQU/BPOS SIPOS VEND/USAGE STATUS

SYSN - 001-0-23 - - IN SERVICE
SYSN SYSDISK1 001-0-23-0 3 SEAGATE IN SERVICE
SYSSUBFS11
SYSSUBFS21
TM
SYSN SYSTERMINAL 001-0-23-1 - MML -
SYSN MML1 001-0-23-2 - MML -
SYSN MML2 001-0-23-3 - MML -
END

<FISCP:IODEV=SYSDISK1;
FILE SYSTEM CAPACITY DATA
TOTAL DISK SPACE: 1030 MBYTES
SUBFS: SYSSUBFS11

KBYTES FILES
TOTAL AVAIL TOTAL MOUNTED
61440 32832 17984 /SYSN/USR1

SUBFS: SYSSUBFS21

KBYTES FILES
TOTAL AVAIL TOTAL MOUNTED
61440 45958 18000 /SYSN/USR2

SUBFS: TM

KBYTES FILES
TOTAL AVAIL TOTAL MOUNTED
20480 5755 6000 /SYSN/USR1/ACS

END

<

 

[ceejay55]

For a start i would get rid of HDU6 and get HDU7 or even HDU5 as they are much more reliable

 

[StZhibuwu]

Deer ceejay55:
In have only the HDU6; but I do not know how to format the disk. Could anybody tell me all the steps of dumping and how to format the disk?

Thanks any way.

 

[bpetya]

Hi StZhibuwb!

BLEQI:EQU=1-0-23-0;
FIMOE:SUBFS=SYSSUBFS11;
FIMOE:SUBFS=SYSSUBFS21;
IOSIE:NODE=SYSN,IODEV=SYSDISK1;

1. switch OFF old HDU.
2. change to new HDU.
3. switch ON new HDU.

IOSII:NODE=SYSN,IODEV=SYSDISK1,SIPOS=3,SUBFS=SYSSUBFS11&SYSSUBFS21;
FICRI:SUBFS=SYSSUBFS11,SIZE=64;
Y;
FICRI:SUBFS=SYSSUBFS21,SIZE=64;
Y;
FIMOI:SUBFS=SYSSUBFS11;
FIMOI:SUBFS=SYSSUBFS21;
BLEQE:EQU=1-0-23-0,ALLFM=YES;
DUSYI;

Peter

 

[StZhibuwu]

Dear bpetya!
Thanks for your answer; I really preciate it.

Good luck!

 

[StZhibuwu]

Dear bpetya !

I got some trouble!

When I use the command "FIMOE:SUBFS=SYSSUBFS11",

The system told me "NOT ACCEPTED , MOUNT POINT FOR A SUBFILE SYSTEM

 

[dstrang1]

If you haven't already ended syssubfs21, do that first. then you also have to end TM (subfs=TM), then you should be able to end syssubfs21:


BLEQI:EQU=1-0-23-0;
FIMOE:SUBFS=SYSSUBFS11;
FIMOE:SUBFS=SYSSUBFS21;
FIMOE:SUBFS=TM;
IOSIE:NODE=SYSN,IODEV=SYSDISK1;


IOSII:NODE=SYSN,IODEV=SYSDISK1,SIPOS=3,SUBFS=SYSSUBFS11&SYSSUBFS21&TM;
FICRI:SUBFS=SYSSUBFS11,SIZE=64;
Y;
FICRI:SUBFS=SYSSUBFS21,SIZE=64;
Y;
FICRI:SUBFS=TM,SIZE=64;
Y;

FIMOI:SUBFS=SYSSUBFS11;
FIMOI:SUBFS=SYSSUBFS21;
FIMOI:SUBFS=TM;
BLEQE:EQU=1-0-23-0,ALLFM=YES;
DUSYI;

Good luck,

Dave Strang

 

[StZhibuwu]

Dear dstrang1 !
Thanks you very much; I have solved it.

Good luck!