Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to uninstall Windows 2000??
- Thread starter sumdumguy
- Start date
AnonGod
IS-IT--Management
- Jun 5, 2000
- 223
Simple -
1. Remove the WINNT directory for the 2000 installation
2. Edit the boot.ini to remove the option to boot to 2000
If you use seperate partitions for the 2 installs, you will still be using the 2000 boot loader unless you change your system partition to the NT4.0 partition. U can do this with the 2000 install disks, with the repair console. Type HELP when you get in, and it will guide you the rest of the way.
There is no drawback to using the 2000 boot loader, so I would not worry about it.
Good Luck!
>
:O> anongod@hotmail.com
"Drawing on my fine command of language, I said nothing."
1. Remove the WINNT directory for the 2000 installation
2. Edit the boot.ini to remove the option to boot to 2000
If you use seperate partitions for the 2 installs, you will still be using the 2000 boot loader unless you change your system partition to the NT4.0 partition. U can do this with the 2000 install disks, with the repair console. Type HELP when you get in, and it will guide you the rest of the way.
There is no drawback to using the 2000 boot loader, so I would not worry about it.
Good Luck!
>
:O> anongod@hotmail.com"Drawing on my fine command of language, I said nothing."
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
