how to turn on caller id to outside

[mrnme]

greetings...

I need to display our phone numbers to outside. does anyone know how to do it. please advise. thanks in advance.

 

[9201]

Ld 15
REQ: chg
TYPE: net

TYPE NET_DATA
CUST 0
OPT
AC2
FNP
CLID yes
SIZE
INTL
ENTRY 0
HNTN
ESA_HLCL
ESA_INHN
ESA_APDN
HLCL 715 (example area code )
DIDN Yes
HLOC
LSC
CLASS_FMT
ENTRY 0 SAVED!
ENTRY 1 ( For a another area code or non-did Number )
HNTN
ESA_HLCL
ESA_INHN
ESA_APDN
HLCL
DIDN
HLOC
LSC
CLASS_FMT
ENTRY 1 SAVED!
ENTRY
ISDN
VPNI
PNI
PINX_DN
MBG
BSGC
PFX1
PFX2
HLOC
LSC
RCNT
PSTN
TNDM
PCMC
SATD
OCLI
DITI
TRNX
EXTT
FTOP
VNR
NIT
NAS ATCL
NAS ACTV
FOPT
CNTC
NATC
INTC

MEM AVAIL: (U/P): 2855581 USED U P: 168569 88809 TOT: 3112959
DISK RECS AVAIL: 256
REQ:

 

[johnpoole]

then you need to add a clid table

ENTRY 2
  HNTN 803
  ESA_HLCL
  ESA_INHN NO
  ESA_APDN YES
  HLCL 5551212
  DIDN NO
  HLOC 434
  LSC  434
  CLASS_FMT DN

ENTRY 5
  HNTN 803
  ESA_HLCL
  ESA_INHN NO
  ESA_APDN YES
  HLCL 434
  DIDN YES
  HLOC
  LSC
  CLASS_FMT DN

my entry 2 shows a listed dept dn, table 5 shows the did number. default on your sets now is table 0, (scr 1111 0), so use entry 0 for the entry you need on the majority of your sets.. my entry 0 is the main listed dn of the hospital.




john poole
bellsouth business
columbia,sc

 

[mrnme]

thank you both. right now what shows is the DID number followed by 0000000s. like 607100000000 to outside rather than area code and the number.

 

[johnpoole]

so change your entry 0 to something close to my entry 5.. the rest seems to be working

john poole
bellsouth business
columbia,sc

 

[mrnme]

where is this entry?

 

[mrnme]

thank you. i found it and made the change. it is working. thanks again.