How to take regain of all

[R.b. Shrestha]

I need to take the regain of all of the programming that has been done in the AMO. How to take the regain ?

 

[eniyamath]

Which version

Install Hicom One tool and you can easily regenerate and back up all data

 

[sbcsu]

The quickest way without any ComWin knowledge is to open up the Assistant 192.0.2.5 or Customer LAN IP
Go to
Configuration Management
OpenScape/HiPath Inventory Management
RMX Backup

Complete a backup there (will take some time)
Then open up the file that it creates.
You can then
Select All
Copy All
Paste out to a File

 

[hipath4k]

Dear R.B.

R u from india?

 

[R.b. Shrestha]

I am from Nepal

 

[hipath4k]

 

[hipath4k]

Try this

 

[hipath4k]

Dear R.B.

If find any difficulty pls contact me via whatsapp or voice - zero zero nine one nine nine five zero nine five three three nice three.

Best of luck

 

[R.b. Shrestha]

Thank you I will try it. Please can you write your whats app number once again ??

 

[hipath4k]

share me urs whatsapp number

 

[hipath4k]

If find any difficulty pls contact me via whatsapp or voice - zero zero nine one nine nine five zero nine five three three nine three.

 

[Moriendi]

Your instructions are a little bit strange. You delete the vegas file with sta-del (OK), then make a display vegas (OK), then make a del-vegas (nonsense). You don't need to make both a sta-del and a del-vegas. I think you meant cha-vegas instead of del-vegas, but depending on if you want to change the generated output filename, even that is not always necessary.

 

[hipath4k]

Hope you are able to take regen of the system

 

[eniyamath]

exe-updat:a1,all;
exe-updat:bp,all;

REG-ANUM;
STA-DEL:AS:VEGAS/DATEI;
STA-REGEN:CRONAMO,LxxxxxxxxxxA00001,N,,,,,,ALL;
(Paste the L number from the REG-ANUM; into the line above instead of the Lxxx etc.)

When that command has completed.
Click on the 6th icon from the left hand side (Start Local Filetransfer)
It will open up a explorer type of window of the HiPath hard disks.

On the left hand side, click on the 2nd 'drive'
It should be labelled something like :A1H1F:

Then in the right hand window you should see a folder called L319xx or similar to the first few letters of the ANUM number.
Drill into that folder and you will find an 'ALL' file.
Drag that out to the desktop

It is an ASCII file with all of the relevant commands to restore the system as it currently is on the telephony side of things.

It is called ALL.samtxt but you can open it with notepad or similar.