I have a Windows NT4 SP6a server as a PDC connected to a Cisco 827 Router using RFC1483 Bridging with IRB with two static public ip addresses and all static ip addresses on the network. What do I need to do in order to get VPN sessions to work?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to setup VPN
- Thread starter techshoot
- Start date
In this case first of all u have to add PPTP protocol. After that add number of VPN connection required. You need to configure the new RAS device. make sure, that the new
VPN-adapter is added to the list of RAS devices. After that you need to ensure now the assignment of IP-addresses for
the VPN-connection, either using DHCP or a static pool of IP-addresses. We are ready for a connection.
Karnesh Sharma
CCNA, MCSE
VPN-adapter is added to the list of RAS devices. After that you need to ensure now the assignment of IP-addresses for
the VPN-connection, either using DHCP or a static pool of IP-addresses. We are ready for a connection.
Karnesh Sharma
CCNA, MCSE
- Thread starter
- #3
I am currently working with Cisco setting up a ipsec connection, though we aren't done yet. Quite an involved setup so far though.
- Status
Similar threads
- Locked
- Question