How to setup Hunt Groups

[mcjdaddy]

I am not sure how to setup a hunt group and need all the help I can get.

 

[MarvO1]

Look in the FAQ section. There is some good Hunt Group information there.
FAQ 799-2652
woops, forgot how to properly embed a FAQ link.

MarvO said it

 

[MarvO1]

Lets try that again.
SEE:
faq799-2652

MarvO said it

 

[mcjdaddy]

This sounds odd but the FAQ goes into programming hunt groups but I also need a diffention of what it can do so that I am sure I am implamenting it properly.

Also, I can ot find the system programming menu that it is talking about. Is it in Config or Admin mode?

 

[MarvO1]

What version is your software?
Huntgroups did not exist until CICS/MICS 4.0
Also, if you are using aCICS, your DN length has to be at least 3 before you will see Hunt Group programming.
The programming is under SYSTEM PROGRAMMING, then HUNTGROUPS.

MarvO said it

 

[mcjdaddy]

Startalk 2.0 4L

What can I do with this software version?

 

[DueE]

ouch! in the most polite way...UPGRADE!!!

DueE

 

[mcjdaddy]

Any idea what the upgrade cost or where to get it? I inherited this peice of equipment.

 

[jsaad]

startalk 2.04L is the voicemail.

i suggest a call pilot 100 or a Flash 2 or 4 if you can find one.

http://www.tgscorp.com

 

[MarvO1]

Mcjdaddy,
I don't believe you ever told us what flavor your KSU software is. That would be nice to know, to help determine the best upgrade options.

MarvO said it