How to setup heartbeat on different ethernet on solaris10

[AIXdream]

Hello team,

I have 4links associated with veritas cluster HA environment, out of them these 2 are being used in the cluster configuration, they have unique MAC and so on.

e1000g2
e1000g3

lines from /etc/path_to_inst
/pci@7c0/pci@0/pci@2/network@0
/pci@7c0/pci@0/pci@2
/pci@7c0/pci@0/pci@2/network@0,1
/pci@7c0/pci@0/pci@2
WARNING:Heartbeat connections are on the same interface card

can someone help me setup this on different interface card? as you see its using the same interface card for HB

 

[djr111]

Are you only going to use one high pri (hla) and one low pri (lla)

I believe 3 total is recommended:

2 - hla
1 - lla

I have this setup on our VCS clusters interconnects.

Each host has a seperate HBA in addition to the onboard NICS.

The onboard has one of the hla's attached to it

the additional HBA has one hla and the lla attached to it.

 

[AIXdream]

Yes, thats what is the setup, can we add additional paths to the interface that HB can be handled? under /etc/path_to_inst... if yes how?