Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to setup heartbeat on different ethernet on solaris10

Status
Not open for further replies.

AIXdream

Technical User
Mar 27, 2007
33
US
Hello team,

I have 4links associated with veritas cluster HA environment, out of them these 2 are being used in the cluster configuration, they have unique MAC and so on.

e1000g2
e1000g3

lines from /etc/path_to_inst
/pci@7c0/pci@0/pci@2/network@0
/pci@7c0/pci@0/pci@2
/pci@7c0/pci@0/pci@2/network@0,1
/pci@7c0/pci@0/pci@2
WARNING:Heartbeat connections are on the same interface card

can someone help me setup this on different interface card? as you see its using the same interface card for HB
 
Are you only going to use one high pri (hla) and one low pri (lla)

I believe 3 total is recommended:

2 - hla
1 - lla

I have this setup on our VCS clusters interconnects.

Each host has a seperate HBA in addition to the onboard NICS.

The onboard has one of the hla's attached to it

the additional HBA has one hla and the lla attached to it.




 
Yes, thats what is the setup, can we add additional paths to the interface that HB can be handled? under /etc/path_to_inst... if yes how?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top