Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to setup a siu card.
- Thread starter station51
- Start date
This is how to enable SMDR on a SIU board:
EDEQI
EV=SI-0,EQU=x-x-xx-0;
EDICCEV=SI-,BAUDR=9600,WORDL=8,STPBIT=1,PARITY=NO,PROC=NO;
EDFII:FILE=SMDR;
EDDFIEV=SI-0,FILE=SMDR;
CLOHI:FILE=SMDR,FORM=2,DMPSIZ=2,DISCR=0;
CLODI:FILE=SMDR;
CLTGI;
Q:
Does the NIU/2 card need to be in the rack to do this?
A:
Yes, in LIM=1.
You use the NIU to login.
What software do you use in your MD110 system?
///doktor
EDEQI
EV=SI-0,EQU=x-x-xx-0;EDICC
EV=SI-,BAUDR=9600,WORDL=8,STPBIT=1,PARITY=NO,PROC=NO;EDFII:FILE=SMDR;
EDDFI
EV=SI-0,FILE=SMDR;CLOHI:FILE=SMDR,FORM=2,DMPSIZ=2,DISCR=0;
CLODI:FILE=SMDR;
CLTGI;
Q:
Does the NIU/2 card need to be in the rack to do this?
A:
Yes, in LIM=1.
You use the NIU to login.
What software do you use in your MD110 system?
///doktor
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question