I recently upgraded my BCM50e from r3 to r6 with Nat Transversal Keycode and patched to System 007.201108 and Desktop 001.201106. 1140e can register to BCM on the same network no problem. I have selected the remote teleworker checkbox and inserted the WAN ip for S1 and S2 and no luck. I am using T1 at BCM location and Comcast DSL at remote location. Both are located in the same building for testing purposes so it's easy for me to check setting right now. Firewall of router at BCM location has ports opened 30000-30099, 7000-7004, 5000-5004 all ports forwarded to ip of BCM. What am I missing?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to Set up Remote Teleworker on r6 BCM50e and 1140e 1
- Thread starter BCM400Guy
- Start date
-
1
- #2
buddyholly2020
Vendor
Have you specified your public IP address in IP Subsystem> Public Network> Provisioned Public Address?
- Thread starter
- #3
buddyholly2020 Yes. Default Gateway in BCM is 192.168.XX.1 which is Private IP to firewall/router. BCM published IP is 192.168.XX.15 Provisioned public address in BCM is e.g. 217.35.6.35 which is the wan address of my firewall/router.
buddyholly2020
Vendor
Are your forwarded ports TCP, UDP or both?
- Thread starter
- #5
- Thread starter
- #6
- Status
Similar threads
- Locked
- Question
- Locked
- Question
