How to set DN for Operator

[thegnat]

I was wondering if you could set the DN a phone dials when you press 0 . I need a certain block of DN's to go to a diferent operator than a seperate block. Our 2700-2799 needs to go to 2726 while the rest need to go to 2501.

 

[vettec5]

You should be able to do this via the pretranslation feature.
Pretranslation allows you to change the first dialed digit within a dialed number; this is achieved by using Speed Call lists as Pretranslation Tables.
The dialing capabilities and/or restrictions of each Pretranslation group are defined in the Pretranslation Tables.
The tables are Speed Call lists modified for Pretranslation.
Only the first dialed digit of a call is pretranslated.
The translation choices are: -
1)Pass the digit as dialed with no changes.
2)Replace the first dialed digit with a specified substitute digit or digits, and pass the remaining digits unchanged.
3)Delete the first dialed digit and pass the remaining digits unchanged.
4)Block the call based on the first digit dialed.

 

[thegnat]

I have never worked with Pretranslation tables before. Could you give me an example or walk through it. Thanks

 

[vettec5]

Sorry for the late reply, have been out of the office.

If you look at the X11 Features and Services NTP 553-3001-306.
Pretranslation.
It shows you how to set it up.