How to route specific lines to Voicemail in Night service modes? 1

[EvgKB]

I need to setup night services for out Meridian DR5 this way:

We have 4 incoming lines in a pool.
Normally they all ring all 8 extensions.
In Night mode 1 we need Line 1 to ring, Lines 2 3 and 4 to go immediately to voice mail;
in Night mode 2 - direct lines 2 and 3 to VM,
In Night Mode 3 - Line 3 to VM;

Is there a way to do it at all?

Thank you

 

[EvgKB]

When I removed all lines from #38 and assigned 4 DNs, it rings, but it rings always, not only in Night mode.
When I removed ALL lines and DNs and only Night mode lists #38 as additional phone, it still does not ring.

 

[EvgKB]

Thank you for your help,
I got some intermittent result, like some lines properly ring in additional set #38, some only appear, and some won't appear at all.

We decided to give up with this setup, and will eventually look for some voip solution.

 

[Multimedium]

I'm sure you've put a lot of time into this and I understand that you'd want to give up. However, I think you are pretty close to get what you want and what you need.

If you want to, I'd like you to have a last look:
[ol 1]
[li]On telephone 38, go back to the point where Lines 1, 2, 3 and 4 are unassigned and 4 Intercom keys are assigned.[/li]
[li]Make sure Services Modes are turned off.[/li]
[/ol]

What is the message that appears on the display when telephone 38 rings (and it shouldn't)?