Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to: Revise FRL to add an Area Code
- Thread starter TechGuyNY
- Start date
New area codes are added in ARS not in the FRL. I would add new "local" area codes and route them the same way you route the existing "local" area Codes.
Example
Area code 212 is routed via Partition Route Table 1 and uses route patern 1 with an FRL of 1.
New area code for Manhattan of 646 should also be routed via Partition Route Table 1.
Example
Area code 212 is routed via Partition Route Table 1 and uses route patern 1 with an FRL of 1.
New area code for Manhattan of 646 should also be routed via Partition Route Table 1.
- Thread starter
- #3
- Status
Similar threads
