admiral777
Technical User
Does anybody have a bc10 patch to return an incoming call to rou from which it came (isdn pri)? Usually this causes congestion, but i know, that pscasi exists for bc9 on cmps5 unit. And it works. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to return incoming call to it's route (bc10)
- Thread starter admiral777
- Start date
- Status
tigerlow66
Technical User
Hi,
Interesting.Can u share with me ,why u do that and is for what purpose?
Interesting.Can u share with me ,why u do that and is for what purpose?
- Thread starter
- #3
admiral777
Technical User
Hi. Not a secret. Examples:
1.User leaved his office, but wants to remain his number the same. md can't reach his new point. so i have to receive his old number from pstn, convert it into new and transfer the call back to pstn by the same path.
2.MD is transit pbx between pstn and other small pbxs. On last ones they did a mass of tricks to present 7-digit pstn numbering plan. and they lost chances to call inside small ones by their 3-digit plan. so when i receive their 7 digits and see via my lcr their internal b-side, i shall put the call back to damned samsung via the same pipe. ooops.
Unfortunately i haven't plexview base for bc10. There was enough in bc9 to bypass 3 assembler compares in cmps5.
Cheers.
1.User leaved his office, but wants to remain his number the same. md can't reach his new point. so i have to receive his old number from pstn, convert it into new and transfer the call back to pstn by the same path.
2.MD is transit pbx between pstn and other small pbxs. On last ones they did a mass of tricks to present 7-digit pstn numbering plan. and they lost chances to call inside small ones by their 3-digit plan. so when i receive their 7 digits and see via my lcr their internal b-side, i shall put the call back to damned samsung via the same pipe. ooops.
Unfortunately i haven't plexview base for bc10. There was enough in bc9 to bypass 3 assembler compares in cmps5.
Cheers.
- Status
Similar threads
- Question
- Locked
- Question