How to restore previous Call Pilot Data?

[GWeeble]

Have a ghost image of previous hard disk that I want to restore to the new HD I have just put in the Call Pilot card.

Have used the Call Pilot recovery image CD from (201i IPE), to get the call pilot re-installed, I was hoping to copy database files across the backup image to the new HD. If anyone has any information I would be very greatful. Beer tokens in offer for resolution.

 

[johnpoole]

might get a better reply from a server forum, the only way i've done that is do the install run the config wizard and restore from the latest backup.. the re-image should do the same thing, and faster.. is you image disk bootable? it usually is, boot from that and follow the prompts

john poole
bellsouth business
columbia,sc

 

[GWeeble]

John,

thanks for reply, Have loaded the os and apps form the image disk that Nortel supply, but as backup all I have is a ghost image of the corrupted HD. I do have both partitions, so I really need to know which files are needed to restore the previous configuration.

Guy

 

[yyrkroon]

unless you have a backup of your db, you're not going to be able to restore the data. an image of the HD is not a valid backup...an Image is only a valid tool, if you can restore the "whole" image.

 

[acewarlock]

Why not use the Ghost inage to reimage the new hard drive and that will put callpilot back to where it was when you made the image, OS and vmails.