How to restart tld remotely 1

[vpk123]

i will manager backup remotely, I hv a problem,
whenever server reboots, tld is going down for few server, need to restart the tld manually, is they any command to restart tld remotely, or how can we avoid this problem.
please help me in this reg.

 

[jdespres]

From the master:

vmoprcmd -h <Media server name> -up X

Where X is the Index number

 

[vpk123]

Thanks for your help,

But thing is if the medium changer is available in device manager then only this cmd will work,

my problem is whenever reboot happens, medium changer is not showing in device manager, for that need to restart tld manually, to void this is there any thing we can do,

thanks in advance

 

[jdespres]

hhhhhhmmmmm.....

Let me get this straight....

When your server reboots... the tld robot doesn't come up?

Drives got AVR mode?

what does vmoprcmd report?

sgscan available? output?

scan avaialble? output?

Does anything come up in messages? syslog?

 

[vpk123]

Yes Your right

When server reboots,the tld robot doesn't come up?
Drives got AVR mode.

what does vmoprcmd report?

D:\VERITAS\Volmgr\bin>vmoprcmd

PENDING REQUESTS

<NONE>

DRIVE STATUS

Drv Type Control User Label RecMID ExtMID Ready Wr.Enbl. ReqId
0 dlt DOWN - No - -

ADDITIONAL DRIVE STATUS

Drv DriveName Shared Assigned Comment
0 COMPAQSuperDLT10 No -


Does anything come up in messages? syslog? yes

1. the following boot-start or system-start driver(s) failed to load:
dlttape-VRTS
2. The NetBackup Device Manager service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 0 milliseconds: No action.



Thanks
vpk

 

[comtec17]

You need to uninstall the tape drivers and reinstall the latest version from Veritas.

 

[jdespres]

I agree..... might be a good idea to re-install the drivers.. On Solaris I would recommend a reconfig reboot...