Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to remove this command?

Status
Not open for further replies.

zaccaz

MIS
Aug 10, 2005
270
HK
Hi there,

Pix506 with 6.3.3, there is a command "vpnclient vpngroup groupname password ********"

I tried "no vpnclient" but it can't remove that command.

I tried "show vpnclient" it replied
LOCAL CONFIGURATION
vpnclient vpngroup groupname password ********

MISCELLANEOUS INFORMATION
- Key exchange is based on Pre-Shared Key

Wondering how can I remove that command? Many thanks!
 
Try the following..

no vpnclient vpngroup groupname password

or
no vpnclient vpngroup groupname

and just start over.

Frank-
 
hi fdurham,

thx for your comments, unfortunately that didn't work

afte further trial-n-error, found that command "clear vpnclient" is the one, for my case!
 
Do a show conf (or show running) command and copy the *'s after the full command. Then put a 'no' in front of it and re-run it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top