How to Remove T1 that was a slave to a DCH

[telecom4242]

I am trying to remove a T1 loop with 24 members that is associated with another DCH, member are 47-94. DCH are built on members 1-46, Thanks for any help

 

[bigindian65]

You have to remove it's association from the Dch first.

Mato' Was'aka

 

[phonz1]

post your adan for the dch please

 

[hawks]

Disable Card LD 60
Remove the trunks in LD 14
Unassociated the D Channel LD 17
Remove loop LD 17

I might have missed something but I think that's it.

 

[phonz1]

the prompt in the dch programming is under the PRI ID, have to remove that loop from there and then out the rest

 

[bigindian65]

That loop is not going to dis in 60 until the dch is dis in 96 and then the loop removed from it in 17. then the card will dis in 60

Mato' Was'aka

 

[phonz1]

and you cant do any of that until the PRI ID is changed

 

[telecom4242]

successful removal, Thanks all for your help.

 

[gkyere75]

Can some one help me how to acquire the ACD with symposuim in the meridian. I want to use symposuim the manage the ACD and agents skillset as well as the queue

 

[hawks]

gkyere75,
You should start a new thread for this.