how to remoteley access md110

[01071981]

can any please tell me how to access MD110 remoteley.is there any hardware required for this with md110 or is there any programing required to be done.

 

[maxilee]

Hello.

You need NIU/NIU2 board installed in the PABX.
This card has ethernet port - so you can assing IP address and then you can use telnet client program to access PABX.

I'm not sure if that card need some licence - I can check it later if you want ...

BR
--
Mark

 

[whosrdaddy]

if network is not an option, you can install a normal modem connected to one of the V24 ports of the NIU/IPU.
ethernet access is licensed.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[Yorkie9]

Have you thought of remote desk topping to the DNA server?

 

[01071981]

hi daddy,

can you tell me how will be the pin connectivivity of v.24 port and modem and its there any programing required from md110 also.
or if you have any document related to this.
thanks

 

[whosrdaddy]

Hi,

The pinouts are described in this thread:

thread806-1271220

Please do use the search function, a lot of good advice can be found in this forum.

Cheers,
Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[01071981]

thanks for your help