How to program kx624 ring designation 2

[tripdad1]

I need to program kx624 to have one of the co's to ring on only one of the extensions. Need company line only to ring on office phone kx7736. Programmed 824 with laptop figured it out then, but i forget how to do it with display phones on older models. Any help would be appreciated.

 

[LkEErie]

CO doesn't stand for company.

It's in the manual. The program is in the 400's.

Good luck.

LkEErie

 

[Trotski]

go into program mode ,sys prgm No. 400 (day in CO)and set the extn that you wish to ring, on a CO basis.

 

[munja]

to get into program mode press "program + *#1234"
then 405 or 408 (DAY CO IN )

 

[Trotski]

sorry got the Prog No. wrong I haven't programmed one of theses for a couple of years, Munja is right *#1234 is the default password for SYS prog mode