How to program IP KEM for Hunt Group, or Line Appearance

[nooop]

Is this possible? Do I do it at the set? Or Element Manager?

Thanks

 

[danthephoneman]

Make sure you set the CAP module in Element Manager to be the extension with the KEM, assign the lines and the hunt group to the set, you can move the line appearences to the KEM by using F*81. I don't believe you can move the hunt group key.I will have to check that.

Also be aware on 4.0 400 and 3.0 50 there is an issue with lines moving from the KEM back to the set when power is lost to the phone. Nortel is aware of this issue and will have a patch out for the 50 by the end of March. the latest Core patch for the 400 has the fix in it already.

 

[nooop]

OK, so I have to set CAP 1 as the set that already has the KEM? I have it blank now. Will it affect anything if it has been in use for a while like this?

Thanks

 

[danthephoneman]

No.

 

[danthephoneman]

Also F*81 will move the Hunt Group key.

 

[danthephoneman]

OK, so I have to set CAP 1 as the set that already has the KEM? YES.


Will it affect anything if it has been in use for a while like this?

NO.

 

[nooop]

Awesome, it worked. Thanks a million.

 

[danthephoneman]

No problem.