how to print ACDQ 1

[jheendi]

Could anyone please advise, which ld to go to find how many ACDQ i have..

Thank you,

Jheendi

 

[MagnaRGP]

Ld 23.

Req PRT
type ACD
cust 0

several enters.

All queues will spit up, so I would suggest that you capture the output.

 

[bigindian65]

ld 23 prt acd

ld 22 SLT - look at ACDN lic used and available.

Mato' Was'aka

 

[jheendi]

Thank you , but is there any ld where I can go and see which one is taken. like for example ld 81 where you can list ACDQ
already existing in switch..

Please advise.

 

[bigindian65]

prt it as a DNB in ld 11, it will list all sets TNBs that are assigned to that queue.

Mato' Was'aka

 

[Johnthephoneguy]

Any unused DN can be an ACDN, it just depends where you program it.

In LD 10 or 11 you can find out:

ld 10:
req=prt
type=ludn

this will give you a list of all available numbers, if it shows just a 7 then every number after that digit is available, ie 7000-7999 (using 4 digits only). If it shows 72 then all 72xx numbers are available, 7200-7299.

Then just go to ld 23 and add it.

ld 23:

req=new
type=acd

then build it accordingly.

JohnThePhoneGuy

"If I can't fix it, it's not broke!

 

[MossEng]

Have you tried:

LD 23
REQ LST
TYPE ACD
CUST 0