How to make paging works

[borceivanovski3009]

Hi all

I have 2 locations, one with BCM 50 and another one BCM 200.
I want to be able to page from the BCM 200 location, to the BCM 50 location.

I can dial the extensions in the BCM 50 location, but i dont know how to make paging work.

Thanks for the help.

 

[stsguy]

is this external paging or internal paging?

 

[borceivanovski3009]

Well I can do it however I want external or internal.
I can separate the paging in this place and the other place.
However is easier to be done?

 

[borceivanovski3009]

It is actually internal paging it should not be external, eventhough what is the difference between the external and internal paging?

 

[fireeater]

internal is over the phone sets and external is over the loud/ceiling speakers

make a difference how to setup

HALLOWED ARE THE ORI

mike

http://www.ics-on.ca

 

[borceivanovski3009]

Well at the moment I am using both.
There is the option to choose, but can we do it like to choose as for the second location as well?
Or if not to make it internally or externally.

Ideally would be to make it both, if not than whichever will do fine.

 

[cook1082]

Look at the remote DISA setup and allow page.

 

[borceivanovski3009]

Where can I find the disa setup?

 

[stsguy]

setup an analog line to answer with disa. when you hear internal dial tone,press*62 for external or*610 for internal page or *630 for both

 

[borceivanovski3009]

How do you mean answer with disa?
Can you tell me in which menu I should look?
Sorry for the trouble.how to make analog line, I didn't see anywhere disa

Just tell me in which menu to look and I will find everything.

Thanks for the help

 

[borceivanovski3009]

I guess I should make the analog line at the second location where I want to page right?
Or I am wrong? Or I should put it on this location from where I want to page?

I guess that the line should be added to the telefones afterwards and when the press the line to press the feature and it will page.

 

[stsguy]

at the location you want to page. under line programming and remote packaging.

 

[borceivanovski3009]

Ok so I must create analog line with disa and than I have to add the line or nothing else?