How to locate IP Address of Phone?

[i100]

Hi All

How can I locate an IP Address of the phone from 3300 ICP, I try using the loc command but does not give me the information about the any of the IP setting of the phone. Can anyone help?

i100

 

[MitelInMyBlood]

On the physical instrument:

1. Hold down both up/down arrows
2. Release the down arrow, continue holding down the UP arrow key
3. While holding the UP-Arrow key, press 2-3-4 in that order
4. Release the UP-Arrow key
5. Press star to view current settings
6. use Down arrow key to scroll
7. Continue scrolling until you get back to "View Current Values" then press the # key several times intil you see the "EXIT" prompt, then press *

 

[i100]

hi

thak you for this, but the phones are not on "sites" and i would like to know the IP address of the phones from my end.

i100

 

[kwbMitel]

Under Maintenance and Diagnostics
Then IP Phones Programmed All

This form lists Ext/MAC/IP and all sorts of goodies.


*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[i100]

hi

thnak you for this

i100

 

[paterson]

On the physical instrument:

1. Hold down both up/down arrows
2. Release the down arrow, continue holding down the UP arrow key
3. While holding the UP-Arrow key, press 2-3-4 in that order
4. Release the UP-Arrow key
5. Press star to view current settings
6. use Down arrow key to scroll
7. Continue scrolling until you get back to "View Current Values" then press the # key several times intil you see the "EXIT" prompt, then press *

Just a little tidbit on this. I found that while viewing the information using this method, I could press the "cancel" button to get out instead of scrolling through.