How to know if my LSP is set to 100 Full Duplex or is un Auto Negotiation

[FXLL]

Hi Comunity,

I need to validate around 70 Avaya G450 MG and LSP servers to be sure that they are in Auto Negotiation and not set to 100 Full-Duplex.

There is a way to get this information using a telnet/ssh connection to the G450 and LSP server?

Thanks in Advance,
FJLL

 

[kyle555]

Well, the LSP gets its network connection from the gateway, so it'll be full duplex.

I guess checking from a show run? Maybe script a backup of your startup-config to dump them all in one place and grep thru on auto or full?
SNMP gets in the standard mibs might have a way, but it'd way too complicated to figure out and you'd still have the backend work of actually enabling snmp polling on them.

Roll up your sleeves, it ain't that bad

 

[AvayaTier3]

CM software load?
s8300 LSP web browser server configuration has separate settings than the media-gateway network settings
Configure Individual IP Services
Set Identities
Configure Interfaces

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]