How to initialize 3com core builder 3500

[chaiyasit]

I have some problem about 3 com corebuilder 3500
when I set it to route and I would like to initialize it to be the default setting.
Could someone help me answer this question?

Thank you.

 

[TimRegester]

I am slightly confused as to what you require. You can reset the switch to factory defaults using a console cable and the command system nvdata reset.

Is this waht you mean?

 

[albie3]

Corebuilder 3500 Question

There are three internal push switches
labled RST, NMI , SRU

what do these push switches do

my goal is to restore the system
software via the ethernet port
the boot diagnostics reveil lots of errors
and does not boot completly
al norman

 

[worker99]

All,
To default the 3500 log on as you do and type
sys nv reset

if you do not know the console login try:
admin/lanplex

else boot via the network and then erase the psswd:
Solution ID:
2.0.5630895.2322051 - 3com solution

to boot because of corrupted s/w:
Solution ID:
112.0.358638.1515824

hope this helps