Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to increase VM Greetings Port IDs?

Status
Not open for further replies.

Tinos

Technical User
Nov 5, 2014
710
BW
Hi all.
I have a 3300 on MiVB 8 which I need to setup EVM AA.
Voice Mail> System Greetings> VM Greetings has only 4 Port IDs and I see that other systems have 20.
How do I increase these Port IDs?
Thank you.
 
Because you have 4 ports I think you've got a CX/CX-I. To increase the ports to a max. of 16 you need to add a DSP-II module. If you have a CX-II/CXi-II you also have a max of 16 but no need of additonal hardware.
 
It is a CXi. Thanks for the info.
 
A bit rusty now with the physical controllers, not sure if compression licenses are required as well to go with the DSP card?

Clever men learns what Wise men shares!
 
I did add an additional DSP card.
On another note when i dial my VM ports they ring then become quite.
Why are they quite?
 
In fact they ring once and cut off
 
If you think your VM configuration is sound, then, I suppose you might require compression licenses to go with the DSP card (again, I am not certain)
You can overprovision compression licenses, try this and see if it works.
I might be wrong, it's been awhile since i play with VM ports & DSP.

Any errors in the logs

Clever men learns what Wise men shares!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top