Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to get CDR over IP

Status
Not open for further replies.

sadel

Technical User
Nov 14, 2007
1
US
I need to get the CDR information to a server that contains an accounting software, which is configured to get the data through the server IP address
 
Hello,

you can take a look to what is configured:

display ip-services
 
You basically route it out over the C-LAN card. Then you will also have to set it up in the "ch sys cdr" screen.

Hell, there are no rules here - we're trying to accomplish something.
Thomas A. Edison

For the best response to a question, read faq690-6594


 
Try this


1. Change node-names ip (Add the IP and node names of CLAN)
2. Change ip-services (Add node name and port number default is 9000)
3. Change System-Parameters CDR (Add the node name to the primary output)
4. Go back to Change ip-services (go to page 3 and enable cdr)
5. Install Avaya RDT Tool available at support.avaya.com

Rest is history

Cyrus
ACS
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top