how to find unused IP Phone TN's 1

[6347]

I am old to Nortel but new to managing a Nortel IP pbx. I need to find unused IP phone TN's. We use I2004's. Here's what I get when I tried:
REQ: luvu
TYPE: i2004
TN
SCH0821

Does that indicate none available? The system shows available:
IP USERS AVAIL: 8 USED: 480 TOT: 488

How do I find the available ones?

Thanks in advance for any help!

 

[nortelinsd]

Try using 2004.

 

[6347]

That doesn't work...SCH0099

 

[vitrinho]

On a CS1K Rls. 5:
"SCH0099 2004? : 2004P1 2004P2"

Try 2004P1 or/and 2004P2

 

[yyrkroon]

or you can put in 500 for type and it will list all analog, then phantoms then virtuals

 

[captaingadget]

IP phone TN's are all "virtual" so it's the number of licences that are important. Or am I mistaken??

 

[6347]

This is what I got, which doesn't give me any IP TN's because they wouldn't be in loop 4??

REQ LUVU
TYPE:
TYPE 500
TN
CDEN
TYPE 500 TN 004 0 07 01 VIRTUAL 4D
TYPE 500 TN 004 0 07 03 VIRTUAL 4D
TYPE 500 TN 004 0 07 05 VIRTUAL 4D
TYPE 500 TN 004 0 07 06 VIRTUAL 4D
TYPE 500 TN 004 0 07 10 VIRTUAL 4D
TYPE 500 TN 004 0 07 11 VIRTUAL 4D
TYPE 500 TN 004 0 07 12 VIRTUAL 4D
TYPE 500 TN 004 0 08 06 VIRTUAL 4D
TYPE 500 TN 004 0 08 12 VIRTUAL 4D
TYPE 500 TN 004 0 08 13 VIRTUAL 4D
TYPE 500 TN 004 0 08 14 VIRTUAL 4D
TYPE 500 TN 008 0 08 05 VIRTUAL 4D
TYPE 500 TN 248 0 00 01 PHANTOM 4D
TYPE 500 TN 248 0 00 02 PHANTOM 4D
TYPE 500 TN 248 0 00 03 PHANTOM 4D
TYPE 500 TN 248 0 00 04 PHANTOM 4D
TYPE 500 TN 248 0 00 05 PHANTOM 4D
TYPE 500 TN 248 0 00 06 PHANTOM 4D
TYPE 500 TN 248 0 00 07 PHANTOM 4D
TYPE 500 TN 248 0 00 08 PHANTOM 4D
TYPE 500 TN 248 0 00 09 PHANTOM 4D
TYPE 500 TN 248 0 00 10 PHANTOM 4D
TYPE 500 TN 248 0 00 11 PHANTOM 4D
TYPE 500 TN 248 0 00 12 PHANTOM 4D
TYPE 500 TN 248 0 00 13 PHANTOM 4D
TYPE 500 TN 248 0 00 14 PHANTOM 4D
TYPE 500 TN 248 0 00 15 PHANTOM 4D

 

[chrisay59]

6347, what rls are you on?

 

[6347]

I am on rls 4

 

[yyrkroon]

print your cequ and post, you might need to create more virtual tn for IP set.

 

[chrisay59]

SCH0821 = "System has no unused units" you need to create a new vSUPL!

Remember RTFM

 

[goosefraba]

Please

either
LD 22

req prt
type slt

or

req slt

One of these will find your system capacities.