Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
how to find total number of PRI's 2
- Thread starter afb1
- Start date
-
1
- #2
ZeroZeroOne
Vendor
list config all will show all the media modules. Look for the DS1 circuit packs.
list signaling-groups will show all the signaling groups. Look for ISDN-PRI.
list trunk-group will show all the trunk groups. Look for isdn.
Each circuit requires a unique DS1 card and typically a matching signaling group. There may be instances where two or more circuits share a D-channel but that's not very common.
You can display trunk-group x to see what ports/cards are assigned to each trunk and find the associated signaling group.
display ds1 [board] will show you some details on each DS1 board, if configured.
list signaling-groups will show all the signaling groups. Look for ISDN-PRI.
list trunk-group will show all the trunk groups. Look for isdn.
Each circuit requires a unique DS1 card and typically a matching signaling group. There may be instances where two or more circuits share a D-channel but that's not very common.
You can display trunk-group x to see what ports/cards are assigned to each trunk and find the associated signaling group.
display ds1 [board] will show you some details on each DS1 board, if configured.
- Thread starter
- #3
-
1
- #4
- Status
Similar threads
- Question
- Question
