How to erase corrupted extension data in LIMS 1

[rokane]

The system is running on BC10 in which I have problem with digital extension(6003) appearing on two lims(lim3 & lim5).
Can some help me on how I can remove the data in lim3 for this extension.The actual working extension is in lim5.

<SYEDP:BPOS=3-1-30;
SYSTEM EQUIPMENT DATA
EQU BOARDID TYPE DIR ROU/TRU
003-1-30-00 77 KL1 6387
003-1-30-01 77 KL1 6441
003-1-30-02 77 KL1 6654
003-1-30-03 77 KL1 6252
003-1-30-04 77 KL1 6297
003-1-30-05 77 KL1 6826
003-1-30-06 77 KL1 6350
003-1-30-07 77 KL1 6077
003-1-30-08 77 KL1 6040
003-1-30-09 77 KL1 6563
003-1-30-10 77 KL1 6003
003-1-30-11 77 KL1 6619
003-1-30-12 77 KL1 6623
003-1-30-13 77 KL1 6527
003-1-30-14 77 KL1 6626
003-1-30-15 77 KL1 6632
END

<SYEDP:BPOS=5-0-20;
SYSTEM EQUIPMENT DATA
EQU BOARDID TYPE DIR ROU/TRU
005-0-20-00 77 KL1 6003
005-0-20-01 77 KL1 6781
005-0-20-02 77 KL1 6770
005-0-20-03 77 KL1 6804
005-0-20-04 77 KL1 6235
005-0-20-05 77 KL1 6198
005-0-20-06 77 KL1 6659
005-0-20-07 77 KL1 6859
005-0-20-08 77 KL1 6088
005-0-20-09 77 KL1 6188
005-0-20-10 77 KL1 6225
005-0-20-11 77 KL1 6179
005-0-20-12 77 KL1 6086
005-0-20-13 77 KL1 6419
005-0-20-14 77 KL1 6574
005-0-20-15 77 KL1 6328
END
<
<KSDDPIR=6003;
KEY SYSTEM DIRECTORY DATA
DIR CUST EQU CAT ADN ODN CALALT
6003 005-0-20-00 6 1
1 6773 1

 

[slash50]

Have you tried to delete the extension? What happens?

 

[rokane]

slash50,

You can delete the extension located in lim5 but the syedp
in lim3 still remain.If you program the extension in lim3
on the bpos position in question ,the system response, Equipment Position Already Assigned.

<KSEXEIR=6003;
KSEXEIR=6003;
SURE? (YES/NO)
<Y;
EXECUTED

<KSEXIIR=6003,CAT=6,ITYPE=19,EQU=3-1-30-10;
NOT ACCEPTED
EQUIPMENT POSITION ALREADY ASSIGNED
<KSEXEIR=6003;
KSEXEIR=6003;
SURE? (YES/NO)
<Y;
NOT ACCEPTED
DIR 6003
NOT ASSIGNED
<KSEXIIR=6003,CAT=6,ITYPE=19,EQU=5-0-20-00;
EXECUTED

 

[nschreuder]

Have you tried a RFBOI:BPOS=3-1-30;?

 

[level7]

Hi Rokane
I have seen this before and its bad news. You have a data mismatch in some program units. ie. some units (DCP etc) think the extension is assigned with number 6003 others think not (DEM etc) The only solution is to write directly into the data records to reset the data (SACOS etc). You need to contact your maintainer as the Program Listings are needed to do this for your release. This is very dangerous unless you know exectly what you are doing and you can do lots more damage getting wrong.

The other option is to re-INL the system and re-build it from scratch. This maybe lengthy but it will fix the problem for sure.

As far as I know this can be caused by KSEXC command being interupted either manually or by disturbances on the links.

Sorry can't be more help

Level 7

 

[rokane]

level7,

Thanks for the info, but may be someone up there like patcher ,whosrdaddy & others can help me without re-inl the system.It is easy to do the re-inl but the customer my not agree , because of long service disruption. It is a 5 lim system.



rokane

 

[whosrdaddy]

rokane,

please provide CADAP; printout

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[rokane]

whosrdaddy,

Herewith is the cadap printout;

<CADAP;
CALENDAR DATA
IDENTITY=SHELL
VERSION=LZY2035151/6/BC10CNA139/R1A
18:17:29
FRI 10 FEB 2006
END

 

[rokane]

whosrdaddy,

I already posted the cadap printouts, any analysis on the problem.



rokane

 

[whosrdaddy]

sorry rokane,


I have no time at the moment to sort this problem out this week, maybe someone else can help on this a bit sooner (patcher?), next week I have some time to look into your problem.

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[rokane]

Whosdaddy,

I hope you can assist me on this as I don't want to do a re-inl just to clear this problem.


Thanks in advance.


rokane

 

[thedayaftertomorrow]

Hi Rokane
KSEXEIR=6003;
NANSE:NUMTYP=EX,NUMSE=6003;
SFCEI;
NANSI:NUMTYP=EX,NUMSE=6003;
KSEXIIR=6003,.....;
You can try