Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to enable tie trunk 1

Status
Not open for further replies.

dawg2

Technical User
Mar 30, 2004
160

Hi can someone please tell me how to enable these trunks again. please tell me load and steps. I have an options 61c that sig with a shoretel.
thanks,Susan

.trac 0 7002

ROUT 2 TIE NTRK 48
48 012 24 DSBL
47 012 23 DSBL
46 012 22 DSBL
45 012 21 DSBL
44 012 20 DSBL
43 012 19 DSBL
42 012 18 DSBL
41 012 17 DSBL
40 012 16 DSBL
39 012 15 DSBL
38 012 14 DSBL
37 012 13 DSBL
36 012 12 DSBL
35 012 11 DSBL
34 012 10 DSBL
33 012 09 DSBL
32 012 08 DSBL
31 012 07 DSBL
30 012 06 DSBL
29 012 05 DSBL
28 012 04 DSBL
27 012 03 DSBL
26 012 02 DSBL
25 012 01 DSBL
24 029 24 IDLE
23 029 23 IDLE
22 029 22 SBSY
21 029 21 IDLE
20 029 20 IDLE
19 029 19 IDLE
18 029 18 IDLE
17 029 17 IDLE
16 029 16 IDLE
15 029 15 IDLE
14 029 14 IDLE
13 029 13 IDLE
12 029 12 IDLE
11 029 11 IDLE
10 029 10 SBSY
9 029 09 IDLE
8 029 08 IDLE
7 029 07 IDLE
6 029 06 IDLE
5 029 05 SBSY
4 029 04 IDLE
3 029 03 IDLE
2 029 02 SBSY
1 029 01 SBSY

 
It appears your TIE Trunks ate T-1's, correct? Just go into LD 60 and type ench 12 24 for example, which is loop 12 channel 24. I would do a stat 12 in ld 60 and make sure you have no alarms because it looks like loop 12 is completely down.
 
Thank you i did go in and enbale the trunk here is the stat after. What do i need to do for the alarm?

OK
.stat 12

DTI TRK LOOP 12 - ENBL
FFMT/LCMT/YALMT: D3/ AMI/DG2
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : RED
CH 01 - IDLE TIE VCE CH 02 - IDLE TIE VCE
CH 03 - IDLE TIE VCE CH 04 - IDLE TIE VCE
CH 05 - IDLE TIE VCE CH 06 - IDLE TIE VCE
CH 07 - IDLE TIE VCE CH 08 - IDLE TIE VCE
CH 09 - IDLE TIE VCE CH 10 - IDLE TIE VCE
CH 11 - IDLE TIE VCE CH 12 - IDLE TIE VCE
CH 13 - IDLE TIE VCE CH 14 - IDLE TIE VCE
CH 15 - IDLE TIE VCE CH 16 - IDLE TIE VCE
CH 17 - IDLE TIE VCE CH 18 - IDLE TIE VCE
CH 19 - IDLE TIE VCE CH 20 - IDLE TIE VCE
CH 21 - IDLE TIE VCE CH 22 - IDLE TIE VCE
CH 23 - IDLE TIE VCE CH 24 - IDLE TIE VCE
.
Thak you so much
 
The T-1 is in red alarm, probably not seeing the far end. Basically the Carrier is not up between the 2 switches. Can you have someone check the other end?
 
I was able to see both side is the a command that I can send to clear the alarm?
 
Hello Susan:
RED alarm is a local alarm (yellow usually indicates far end). It is unlikely that the channels would be IDLE if the Carrier (Loop) is in Red Alarm. You may want to disable the Loop (DISL 12 and ENLL 12 to re-enable) and try putting it in Loopback (RLBK 12) and see if the channels and alarm status clear. You could also invoke a self-test on the DTI card (SLFT 12 - the Loop must be disabled). If you continue to have problems with it you may want to check the programming of the Loop - it shows D3/AMI - the providing CO may have changed the programming or changed out equipment so that they don't quite match.

T1 maint commands are LD 60, D-channel (for PRI) are LD 96.

Just a thought.
 
Thank you for all your help and assistance. I am still having an issue they are reporting that it is taking a long time to dial out. I did have to enable 7 trunks again this morning and it is showing red alarm. What do I need to to do the clear the alarm. Please give load and comand lines.

Thank you,
Susan
 

Thank you for your help and advice. But I am still in red alarm. What do I need to do next? Do I need to do a reset on ini? I have people complaining that it takes a long time for them to hear ringing on the other side. Please send me commands and ld and what I need to do. I have included the information.
Thank you in advance for all your help. Susan


DTI TRK LOOP 12 - ENBL
FFMT/LCMT/YALMT: D3/ AMI/DG2 (RLBK)
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : RED
CH 01 - DSBL TIE VCE CH 02 - MBSY TIE VCE
CH 03 - MBSY TIE VCE CH 04 - MBSY TIE VCE
CH 05 - MBSY TIE VCE CH 06 - MBSY TIE VCE
CH 07 - MBSY TIE VCE CH 08 - MBSY TIE VCE
CH 09 - MBSY TIE VCE CH 10 - MBSY TIE VCE
CH 11 - MBSY TIE VCE CH 12 - MBSY TIE VCE
CH 13 - MBSY TIE VCE CH 14 - MBSY TIE VCE
CH 15 - MBSY TIE VCE CH 16 - MBSY TIE VCE
CH 17 - MBSY TIE VCE CH 18 - MBSY TIE VCE
CH 19 - MBSY TIE VCE CH 20 - MBSY TIE VCE
CH 21 - MBSY TIE VCE CH 22 - MBSY TIE VCE
CH 23 - MBSY TIE VCE CH 24 - MBSY TIE VCE
.STAT 12

DTI TRK LOOP 12 - ENBL
FFMT/LCMT/YALMT: D3/ AMI/DG2 (RLBK)
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : RED
CH 01 - DSBL TIE VCE CH 02 - MBSY TIE VCE
CH 03 - MBSY TIE VCE CH 04 - MBSY TIE VCE
CH 05 - MBSY TIE VCE CH 06 - MBSY TIE VCE
CH 07 - MBSY TIE VCE CH 08 - MBSY TIE VCE
CH 09 - MBSY TIE VCE CH 10 - MBSY TIE VCE
CH 11 - MBSY TIE VCE CH 12 - MBSY TIE VCE
CH 13 - MBSY TIE VCE CH 14 - MBSY TIE VCE
CH 15 - MBSY TIE VCE CH 16 - MBSY TIE VCE
CH 17 - MBSY TIE VCE CH 18 - MBSY TIE VCE
CH 19 - MBSY TIE VCE CH 20 - MBSY TIE VCE
CH 21 - MBSY TIE VCE CH 22 - MBSY TIE VCE
CH 23 - MBSY TIE VCE CH 24 - MBSY TIE VCE
.DLBK 12

.STAT 12

DTI TRK LOOP 12 - DSBL
FFMT/LCMT/YALMT: D3/ AMI/DG2
.ENLL 12

PRI000 12 7

PRI000 12 7

DTA021 12

DTI030

12
.ENLL 12

DTI022

12
.STAT 12

DTI TRK LOOP 12 - ENBL
FFMT/LCMT/YALMT: D3/ AMI/DG2
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : RED
CH 01 - DSBL TIE VCE CH 02 - DSBL TIE VCE
CH 03 - DSBL TIE VCE CH 04 - DSBL TIE VCE
CH 05 - DSBL TIE VCE CH 06 - DSBL TIE VCE
CH 07 - DSBL TIE VCE CH 08 - DSBL TIE VCE
CH 09 - DSBL TIE VCE CH 10 - DSBL TIE VCE
DTC001

CH 11 - DSBL TIE VCE CH 12 - DSBL TIE VCE
CH 13 - DSBL TIE VCE CH 14 - DSBL TIE VCE
CH 15 - DSBL TIE VCE CH 16 - DSBL TIE VCE
CH 17 - DSBL TIE VCE CH 18 - DSBL TIE VCE
CH 19 - DSBL TIE VCE CH 20 - DSBL TIE VCE
CH 21 - DSBL TIE VCE CH 22 - DSBL TIE VCE
CH 23 - DSBL TIE VCE CH 24 - DSBL TIE VCE
.ENCH 12 1

DTI033


OK


OK
.ENCH 12 23

DTI033


OK
.ENCH 12 24

DTI033


OK
.STAT 12

DTI TRK LOOP 12 - ENBL
FFMT/LCMT/YALMT: D3/ AMI/DG2
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : RED
CH 01 - IDLE TIE VCE CH 02 - IDLE TIE VCE
CH 03 - IDLE TIE VCE CH 04 - IDLE TIE VCE
CH 05 - IDLE TIE VCE CH 06 - IDLE TIE VCE
CH 07 - IDLE TIE VCE CH 08 - IDLE TIE VCE
CH 09 - IDLE TIE VCE CH 10 - IDLE TIE VCE
CH 11 - IDLE TIE VCE CH 12 - IDLE TIE VCE
CH 13 - IDLE TIE VCE CH 14 - IDLE TIE VCE
CH 15 - IDLE TIE VCE CH 16 - IDLE TIE VCE
CH 17 - IDLE TIE VCE CH 18 - IDLE TIE VCE
CH 19 - IDLE TIE VCE CH 20 - IDLE TIE VCE
CH 21 - IDLE TIE VCE CH 22 - IDLE TIE VCE
CH 23 - IDLE TIE VCE CH 24 - IDLE TIE VCE
.

 
Hi again, Can people are starting to complain that it is taking a long time to dial out. Can someone give me an idea what to look for?
thank you
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top