How to enable SNMP on 3500 1

[jkeeper]

I would like to know how to enable SNMP on a 2900
and 3500 Cisco Switch.?
I have not been able to find
it or get it too work for me.

 

[hexn]

switch(config)#snmp ?
access-policy Define an SNMPv2 access policy (acl)
chassis-id String to uniquely identify this chassis
community Enable SNMP; set community string and access privs
contact Text for mib object sysContact
context Define an SNMPv2 context
enable Enable SNMP Traps or Informs
host Specify hosts to receive SNMP TRAPs
location Text for mib object sysLocation
packetsize Largest SNMP packet size
party Define an SNMPv2 party
queue-length Message queue length for each TRAP host
system-shutdown Enable use of the SNMP reload command
tftp-server-list Limit TFTP servers used via SNMP
trap-authentication Send TRAP messages on receipt of incorrect community
string
trap-source Assign an interface for the source address of all traps
trap-timeout Set timeout for TRAP message retransmissions
view Define an SNMPv2 MIB view


Is that what you are looking for? Looks like SNMP is supported just fine.

 

[jkeeper]

Using solarwinds App. When I entered the ip address and the community strings none worked and I know that we did change the strings from private/public too one of our liken. NO Go?

I wanting to know how do you enable SNMP on the 3500s?

Thank you for your help. I will keep after it.

JKeeper