How to display CLID on terminal display...

[penduko]

Hi,

What are the things that I have to do to display the CLID to digital phone's LCD (display) from an ISDN trunks.

Right now, the displayted information is the ROUTE ACOD + MEMBER NUMBER....

Thanks in advance...

Regards,

Pedro

 

[wallae]

Hi Pedro,
are you sure that your ISDN Provider will sent the CLID of the caller to your PBX ??
regards wallae

 

[penduko]

Hi,

Thanks for the reply, yes we are sure they are sending it, I turned on MSGI and MSGO for the defined DCH and we can see the ANI on the ISDN messages. Also, the ANI is displayed in the CDR after the inbound ISDN call is completed.

Thanks.

Penduko

 

[wallae]

Hi,
in the CLS please be sure you have CNDA DNDA DDGA NAMA
regards wallae

 

[penduko]

Hi

Thanks,

Is the settings you mentioned above are for class of service for digital phones in LD 11?

Thanks again.

Penduko

 

[wallae]

yes,
you can check it in LD 20 PRT or change in LD 11 CHG

 

[penduko]

Hi,

I checked on the CLS of the 2616 phone and they are all set to allowed. However, the system still doesn't display the ANI.

thanks,

Penduko

 

[wallae]

Hello Pedro,
you can check also in LD 22 Prt Parm at the CLID prompt it should be yes and in the D-Channel at CLID Prompt it should be programmed OPT1
regards Hans

 

[penduko]

Hi Hans,

Thanks for all the information. Im now able to make it work.

Thanks again.

Pedro