How to Discover the Openstage 15 HFA MAC via command from the Hipath 4000 exchange

[ronaldotec]

Hi all,
Please I need help, to find out the IP of the extension I type DISPLAY-SBCSU:STNO=3000,TYPE=OPTIDAT; but I wanted to know which command I use to discover the MEC of the device via command,

I will explain better I have an openstage 15 HFA device that it connects more the display is off then I wanted to find out the mec to know which extension is configured on that device

 

[sbcsu]

DISPLAY-SBCSU:TYPE=IPSEARCH,IPADDR="*"."*"."*"."*";

Above will give you the IP address of the Phone

To find out the MAC address then

https://IP

address of phone

 

[ronaldotec]

Thanks sbcsu, but this command is not what I want, because I need to identify which ip is on this device because I can't see it because the display is off and I need to identify which extension is on it so I can see which is the correct ip if I can find out the mac via command I compared it with the device and found the correct ip

 

[sbcsu]

If the device is up and running then you can log on and see.
If the device is offline then you can only read the MAC address from the back of the phone, the number will not be seen.
You can always just default the phone and give it a new number