how to decipher FACILITY content

[VicKol]

Hi,

We are trying to make a transfer through the QSIG trunk. I'm struggling to understand the meaning of the FACILITY messages in the Nortel ISDN trace (see below).

Is there any tool/method to convert it to a text representation?

Thanks,
Vic

DCH 62 UIPE_OMSG CC_FAC_REQ REF 0000000D CH 0 TOD 10:33:24 CK 1B073466

DCH 62 UIPE_OMSG CC_FAC_REQ REF 0000000D CH 0 TOD 10:33:30 CK 1B0766A2

DCH 62 UIPE_OMSG CC_FAC_REQ REF 0000800D CH 0 TOD 10:33:30 CK 1B0766A4

 

[yyrkroon]

There's nothing there to decipher. You need to change it to mon 2 instead of 0

in ld 96, type set msgo 62 mon 2 to turn on level 2 monitoring, set msgo 62 mon 0 to go back to normal. any hex to ascii converter will work, the trick is knowing where the off-set starts and that varies depending on the msg and data

 

[VicKol]

Thanks! I'll change the trace and go bit-by-bit...