Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to create new DID and DN within using template from database?
- Thread starter mistabatu
- Start date
Hi,
My advise is to never copy a set. Unless you know what you are doing and when to do it.
Easiest way is to print a TN that has a configuration that you want and create a new TN using the printout and change what needs to be changed (DN. SCPW i.e.)
To print the TN of the example set:
To create the new set:
Marc D.
If Bill Gates had a nickel for every time Windows crashed... Oh wait, he does...
My advise is to never copy a set. Unless you know what you are doing and when to do it.
Easiest way is to print a TN that has a configuration that you want and create a new TN using the printout and change what needs to be changed (DN. SCPW i.e.)
To print the TN of the example set:
Code:
LD 20
REQ: PRT
TYPE: TNB
TN the TN you want to printTo create the new set:
Code:
LD 20
REQ: NEW
TYPE: The set type you want
TN the new TN (You found with LUVU)
and the rest of the prompts you enter like the example setMarc D.
If Bill Gates had a nickel for every time Windows crashed... Oh wait, he does...
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question