How to create a VPN using cisco

[dreamaz]

Hi all

Looking to create a vpn using the internet. I have a cisco pix 515 and 2 cisco 2621 routers.

One location, has a building access point (static IP) and the clients there use NAT.

I want to VPN from a remote location into the office with the building accesspoint (gateway)

This is kinda what it's like

Clients(A)--NAT-->GATEWAY----CLOUD----GATEWAY---->CLIENT(B)

Question. Can i Vpn from client B into a workstation in client A?? how does this work?

What client software can i use other than cisco vpn client

Any help is appreciated!

 

[lexcoupe]

Hi,

It's possible to vpn from B to A. You can use cisco vpn 3.XXX or follow this link below;

http://www.cisco.com/warp/public/110/pix3000.html

Regards Lexcoupe

 

[yizhar]

HI.

It seems that you need a site to site VPN (gateway to gateway), but please provide more details so we can better help you.

Bye
Yizhar Hurwitz

http://come.to/yizhar

http://teachers.sivan.co.il/yizhar

 

[dreamaz]

I believe so, ideally I would like to VPN from one client, directly into another passing the gateway which runs NAT

Hope this helps, I'm a little new to this so please bear with me