Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to convert anchor points so that they make sharp corners? 1

Status
Not open for further replies.

BobbyBest

Technical User
Jan 9, 2010
2
DE
Hi,

after making some forms with the pen tool I noticed that some have sharp corners and others doesn't (See attachment).

How can i fix the "cut" ones?
 
...in the stroke palette you have "miter limit" settings, increase this value until the selected artwork is adjusted correctly...

...the miter values are only active when you have the "miter join" selected in the stroke palette...




andrew

============
============
 
...also to add to my above post...

...if you later adjust the line, you may find you need to adjust the miter value again, just something to be aware off when making adjustments to paths...

...can catch you out if in a rush, zoomed in and not seeing all the joins in view...




andrew

============
============
 
thank you, worked perfectly.
searched this in google for quite a long time, but I've found no solution till now.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top