Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to connect the SL1000 with another PBX 1

Status
Not open for further replies.

dmeseriasul

Programmer
Aug 13, 2019
3
RO
Hi, I have an SL1000 and another PBX. I connected one extension from SL1000 to the other PBX (Yeastar S20) in an FXO port. I can call from S20 to SL1000. When I call from SL1000 to S20 IVR answers but I can't type the desired extension (DTMF signal is not transmitted).
Please help, or if you know another method of interconnecting between these two PBXs thanks in advance.

Dan
 
Are you using a analog extension from the SL1100 into a FXO port on the other end? If so, try setting the analog extension in 15-o3-03 from Normal to Special. Hope that helps...
 
Yes, it's analog. Tomorrow when I get to the pbx I will try your suggestion and come back in detail.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top