How to configure SIP trunk inbound and outbound dialing in Samsung OS 7100

[Akpevwe]

Hi,

My company recently sold A SIP line to a customer using Samsung OS 7100 and the customer has further asked us to install and configure the line on the PBX and place needed inbound and outbound routing.

This would be my first time of even knowing about this Samsung PBX and i have been saddled with with task of getting this to work.

i have managed to enter the needed SIP trunk license and register the SIP line to our SIP registrar server.

I have also been able to get the inbound call to ring on the correct extension.

the challenge now is getting a call out of the system.

I would appreciate any detailed step by step guide on how to configure outbound dialing from any extension in the PBX through the SIP trunk. Essentially everyone is permitted to dial out through the SIP trunk.

Regards,

-Akpevwe

 

[brightnet]

You have to enter either the telephone number of the account number in the outbound cli field for every extension.

 

[RussCrook]

4.1.2 to set these up Check number association in 2.8.0 is default as these are.

Your first group will probably be 9.

Then set your CLi's etc in 2.4.3

Hope this helps