How to check and change SNMP Community string for M1 11cmini, 11c, 61c

[modys]

Hi All,

How to check snmp string set up in the M1 opt11c mini, opt11c, 61c and 81c systems? How to modify it? In our customer environment, "pulic" and "private" communinity strings are restricted by the network firewall rules and/or intrusion Detection rules. So, we need to modify it.

Your response is highly appreaciated.

regards,

Samsul

 

[yyrkroon]

Community name strings
Read-only and read/write community name strings control access to all MIB
data. A set of administrator community name strings are supported with readonly
privileges, with the default strings of “public”, “admingroup2” and
“admingroup3”. The first and third community name strings provide access
to system group MIB variables, while the second community name string
provides access to all MIBs.
Use commands in LD 117 to configure MIB community name strings for
access to Call Server MIBs (MIB-II objects) and Signaling Server/Voice
Gateway Media Card MIBs.

The following commands are used to configure and print the community name strings (LD117).
• CHG ADMIN_COMM
• CHG SYSMGMT_RD_COMM
• CHG SYSMGMT_WR_COMM
• PRT ADMIN_COMM
• PRT SYSMGMT_COMM

 

[yyrkroon]

Everything you need to know about SNMP and Nortel PBX - refer to SNMP Description and Maintenance NTP 553-3001-519.

Hopes that helps.

 

[modys]

Thank you very much Guys. much appreciated.

Kind regards,
Samsul Mody

 

[wonga316]

we are having a similar issue. i have checked the NTP and confirmed that the required pkgs are installed on the meridian 1. we are running release 3 but all of the commands related to SNMP chg and prt in LD117 are not recognised by the system.