Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to check active calls on PRI's 2

Status
Not open for further replies.

new2nortel2

Technical User
Apr 28, 2014
42
US
Hi,

How can I check the active calls/channels on PRI spans?

Thank you!

new2nortel2
 
LD 60
stat X (X loop no of PRI)

this will show all the 30 channels of PRI. BUSY will be shown against the busy channels. free channels will show IDLE.
 
then for checking the calling parties details on a particular channel ,go to.
LD 80
TRAD 2 3 (here 2 is loop number and 3 is channel number)...
 
Thank you for the help, much appreciated. Will this work also for active calls on digital cards, analog cards? To see how loaded a shelf or card is?
 
Sure, you can stat a whole card or loop and see how many are busy. Do this in LD 32.
 
It is also useful in LD 80 to TRAC 0 ACOD (customer number followed by access code of the route).
So you can see the status of all the channels in the route with one command.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top